IMG_3042.jpg
IMG_3041.jpg
rend-01.png
furniture+final+6-01-2.jpg
furniture+final+5b-2.png
insot-01.png
scrsh.jpg
finalp-01.png
IMG_3038.jpg
planter-03.png
planter-02.png
 This low fidelity mock up was screwed together in one night with inexpensive wood, just to test the weight, balance and visual aesthetic of the planter. Many insights from this led to the refined final prototype
fpm-01.png
 A full scale plotter print out of the side view was trimmed and then taped to one of the 5' long ash planks for reference points to drill and screw into
 My late night set up during Thanksgiving Break when all shops were closed
 Closer look into pencil markings and drilled holes
 Screwing the structural back-slats into the legs of the planter
 I used a combination square as a visual reference to keep the drill bit square to the wood. This ensured that I didn't drill at an angle and potentially drill through one of the thin shelves. 
vplanter-01.png
IMG_3240.png
IMG_3249-4.jpg
prev / next